Hospitality

4x4 vehicle hire: how to calculate the duration and scope to quote

A 4x4 vehicle hire is priced on a time window and a written scope. Here is the transport company's method: break down the duration, define the stops, allow for waiting and return, and write a quote with no grey areas.

Route planned on a map laid on a 4x4 bonnet

This article takes the point of view of the transport company receiving a request from a hotel, a riad or an agency. For the definition of the service, start with the difference between a transfer, a vehicle hire and an excursion. For the general framework of the platform, see the How it works page.

Why a 4x4 changes the calculation

A vehicle hire reserves a vehicle and a driver over a time window. In a 4x4, the real time of a route drifts more easily from the initial estimate. The type of road, the weather, photo stops, group breaks and ground conditions all weigh on the duration. The customer thinks in terms of a "programme", not billed hours.

Your role is to translate a programme into hours and stops. Do not rely on a generic figure: draw on your knowledge of the terrain, on feedback from your drivers and on the history of your previous runs on the same route.

The five blocks of time to add up

Breaking down the duration before pricing
BlockWhat it containsWhat you write in the quote
ApproachThe vehicle's journey to the pick-up point, if it is billedBilled or included, and from where the time counts
DrivingJourneys between stops, estimated from your experience of the routeNamed stops, in order, with a stated margin
StopsPhotos, visits, breaks, the group's mealsNumber of planned stops and target duration for each, to be agreed
WaitingThe driver waits while the customer visits or takes part in an activityWaiting included in the window or billed extra
ReturnReturn of the travelers to the end point, return of the vehicle to its basePrecise end point, empty return included or not

Add up the five blocks, then decide on a margin. This margin must be visible: either it is included in the stated window, or it is a separate item. A hidden margin ends in a discussion on arrival.

Setting the scope: what is in the quote, what is not

The duration says "how long". The scope says "where, with whom, to do what". The two are defined together.

  • Start point and end point, named precisely. If they differ, say so.
  • Area or route covered, with the main stops listed.
  • Number of travelers and luggage volume on which the price is based.
  • What is not covered: an unplanned detour, an added stop, a change of destination during the day.
  • Who decides on a change along the way: a single contact designated by the customer.

For a drop-off in the medina or at a riad, assume nothing about vehicle access. Only the riad confirms the drop-off location; see how to agree the drop-off point with the riad.

Step-by-step pricing method

  1. Ask for the desired programme, not just the hours. Which stops, in what order, with which breaks?
  2. Have the start point, end point and number of travelers with their luggage confirmed.
  3. Ask about the terrain: does the customer expect ordinary roads, tracks, isolated areas? Then rely on your driver to judge feasibility.
  4. Estimate the driving between each stop from your experience, then add the stops and waiting block by block.
  5. Decide on the return: does the vehicle return empty, does it spend the night away from its base? If so, agree the associated costs with the customer.
  6. Choose the form of the price: a fixed time window, or a base window plus an overrun unit. Name the overrun unit and how it is counted.
  7. Write the quote with scope, window, exclusions and change rule. Ask for written confirmation before assigning the vehicle.

The cases that create disputes

Unannounced waiting

The group spends longer than planned at a stop. If the waiting was neither included nor priced, everyone reads it differently. Specify in the quote where counted waiting starts and stops.

The forgotten return

The customer thinks the day ends at the hotel. The driver still has to bring the vehicle back. Write what is included in the window: return of the travelers only, or return of the vehicle too.

The stop added along the way

A traveler asks for a detour on the spot. The driver should not have to arbitrate the price. Set a rule: any added stop is confirmed by the designated contact, and its effect on the duration is announced before leaving.

Confusion with an excursion

If the customer expects a guide, a supervised programme or activities, it is no longer a simple vehicle hire. Name the service correctly from the reply, as in what a good transport company answer must specify.

Message template to adapt

Checklist before sending the quote

  • The programme is written stop by stop, in order.
  • Each time block (approach, driving, stops, waiting, return) has been estimated separately.
  • The margin is either included and visible, or a separate item.
  • The end point and what happens to the vehicle after the assignment are specified.
  • The exclusions and the overrun rule appear in the quote.
  • The intended driver has reviewed the route and said whether it is realistic.
  • Written confirmation from the customer is requested before assignment.

For later operations, compare with the brief mistakes described in sedan vehicle hire in Casablanca. The substance is the same: a time window, not a route. You will also find the transport company's point of view on the page dedicated to transport companies.

With WAYLISS

  • Each ride keeps a viewable history: request, assignment and steps.
  • The transport company assigns the driver and vehicle; the property sees the driver’s first name, the vehicle and the plate.

Learn more: How WAYLISS works

Frequently asked questions

Frequently asked questions

Should you bill by the hour or by the day?

Both exist. The most important thing is that the time window is written down and the overrun rule is clear. Choose the form that matches how much visibility you have on the programme: the vaguer it is, the more a base window with an overrun unit protects both parties.

How do you state the driving time without promising a schedule?

Present it as an estimate based on your experience of the route, with the stated margin. Do not guarantee an arrival time that the terrain or weather can change; guarantee the rule that applies if the time is exceeded.

What should you do if the customer wants to change the programme on the day?

Apply the rule written in the quote: the designated contact approves, you announce the effect on duration and price, then the driver continues. Keep a record of the exchange so you can refer back to it.

Should I include the empty return in the price?

It depends on your policy and the assignment. In every case, write it down: vehicle return included or billed separately. Do not let the customer find out on the invoice.

How do you avoid disagreements over the scope?

Name the stops, the end point, the exclusions and the person who approves changes. Ask for written confirmation before assigning the vehicle.